Home Polishing Marine Compounds


Farecla Profile Finish Liquid Compound 3.78 Litre

NZ $178.28 excl GST
Sorry, the selected product is currently out of stock. Sorry, there are only 14 of this item currently in stock. the selected product is not available.

Stage 2: Finish. A single, new formulation finishing compound, Profile Finish is a fine grade abrasive compound that will remove swirls from dark coloured surfaces, leaving a high gloss.

Marine Compounds, Cutting and Finishing Compound, FARECLA, Cutting and Finishing Compound, Marine Compounds

Stage 2: Finish / Swirl Removal

A single, new formulation finishing compound. Profile Finish is a very fine finishing compound designed to remove any light swirl marks and holograms from dark coloured surfaces, or high quality painted lacquered and gel coat surfaces to leave the ultimate high gloss finish. It will not scratch and is particularly good on soft coatings which are susceptible to swirl marks.

Profile Finish is ideally applied using a Farécla G Mop Finishing Foam, which was engineered in tandem with the compound to provide optimum performance. For a higher cut, use with a G Mop Lambs Wool Pad.


  • Great value - Economical in use due to its low viscosity
  • Swirl & Hologram Remover -Swirls and holograms are quickly eliminated permanently
  • Surface Restorer - Restores dull surfaces and enhances colour
  • Gentle Action - Fine abrasive formulation removes marks without scratching
  • High Gloss Result - Gives a high shine nish with good depth and clarity

Use with:
Primary Applicator:
G Mop Finishing Foam
#FAGMF301 ( 75mm)
#FAGMF601 (150mm)
#FAGMF801 (200mm)
Secondary Applicator (for higher cut)
G Mop Lambs Wool Pad
#FAGML301 (75mm)
#FAGML601 (150mm)
#FAGML801 (220mm)
Other sizes available.


In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You might also be interested in ...