View Favourites
Home Brands MENZERNA

MENKIT2

Menzerna 4 Step Sampler Kit

NZ $109.95 excl GST
Sorry, the selected product is currently out of stock. Sorry, there are only 9 of this item currently in stock. the selected product is not available.

MENZERNA

This is the NEW Menzerna Sampler Kit which features 3 stages of cutting and a super slick protection sealant, allowing you to experience the full range of Menzerna for a budget friendly price. Each Polish provides a different level of cut and gloss allowing you a wide spectrum from removing deeper swirls and heavy oxidisation to a final light swirl removal with a high gloss finish.


1 _ Menzerna Heavy Cut Compound 400 Performance Compound (250ml) - MENHC250

This cutting compound has a high cut, it is the strongest in the Menzerna range and is designed for modern ceramic clear coated paints often found on BMW, Mercedes, VW and other Euro vehicles. Menzerna Heavy Cut 400 is made to remove 1500 grit sanding marks, deeper swirls and other moderate paint defects easily. 

2 – Menzerna Medium Cut Polish 2400 (250ml) - MENMC250
This polish has a medium cut combined with a medium gloss factor, and is designed for modern ceramic clear coated paints. Made to remove 2500 grit sanding marks, swirls, light oxidisation and other minor paint defects easily.

3 – Menzerna Super Finish 3500 (250ml) - MENSF250
This finishing polish has a low cut combined with a high gloss finish, can be used as a light one-step process or to restore gloss after a cutting stage. Made to refine paint and eliminate very light swirls and light holograms, leaving behind a glossy finish ready for a premium wax or sealant.

4 - Menzerna Power Lock Ultimate Protection (250ml) - MENPLL250
This long-term polymeric protective sealant will give your paintwork a deep wet high gloss finish that will compete against most carnauba waxes available in the market and offer up to 6 + months of protection for your vehicle. Can be applied by hand or machine.

Please note: as with all polishes best results are achieved once the surface has been prepared correctly (washed / clayed etc). Areas should be clean, dry and cool – it is advisable to work undercover or in shade, with good lighting.



 
Safety Data Sheet MENHC250
Safety Data Sheet MENMC250
Safety Data Sheet MENSF250
Safety Data Sheet MENPLL250

Questions?

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You might also be interested in ...