View Favourites
Home Repair Body Repair Body Fillers

TMBAF3

Troton Master Amber Multifunctional Polyester Body Filler 3L

NZ $87.55 excl GST
Sorry, the selected product is currently out of stock. Sorry, there are only 25 of this item currently in stock. the selected product is not available.

Body Fillers, TROTON, Body Fillers

Description

Multifunctional lightweight polyester body filler for fast car body repair. Combines high filling and finishing qualitites in one product. Ideal for the repair of medium and small damages. Thanks to its light weight can be applied on large surfaces, ensuring smooth finish and easy sanding.

Advantages

  • Very smooth surface after sanding
  • Exceptional quality and fast sanding
  • Creamy consistency
  • Ideal for creating shapes
  • Low density allows the application on large surfaces

Substrates

Product shows very good adhesion to different substrates. It can be applied on:

  • Steel and aluminum after matting and degreasing
  • Zinc-coated steel after matting and degreasing
  • Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic primers and nitrocellulose.

 

Application process

 
  • Use

             Lightweight body filler for quick car body repair

 

  • Mixing propotion by weight

    Body Filler: 100: 2
    Hardener: 2
    Stir thoroughly until a homogenous paste is achieved.
    Be careful not to create air inclusions.

  • Number of layers

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.
    Pot life 4÷5 min. at 20°C

  • Drying time

    16÷26 min. at 20°C.
    Temperatures below 20°C significantly increase the drying time.

  • Sanding

    Coarse sanding (dry): P120÷P180.
    Finish sanding (dry): P220÷P320.

  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Safety Data Sheet
Technical Data Sheet

Questions?

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You might also be interested in ...