- Analogue temperature control from 40 - 700°C
- Ceramic heating element
- Robust brush motor
- Dust filter
- Swiss technology and engineering
The energy HT1600 is a compact, high-performance hot-air hand tool suitable for a wide range of professional applications. This tool is a firm favorite thanks to its modern design, solid performance and unbeatable value.
- Energy HT1600 Hot Air Welder
- 5mm Tubular nozzle 130.632
- 4mm Speed welding nozzle 146.740
- Sturdy tool case for easy storage
- Instruction manual
||40°C - 700°C
How To Weld Rigid Plastics:
Which materials can be welded?
Only Thermoplastics can be welded. You must weld like for like plastic to achieve a structurally sound bond.
The below video shows the WELDY energy 1600 for welding PE, PP and PVC plastic sheets:
- Prepare the weld surface. Ensure it is clean of dust and dirt so that you can achieve an unobstructed plastic-to-plastic bond. Notch out a “V” groove along the crack or join.
- “Tacking” the join or crack together helps to secure the material in place to ensure there is stability and no misalignment of the joins. Run the tip of a tacking nozzle or heated metal item along the join to create an initial bond.
- Using a speed welding nozzle or by free hand pendulum welding technique, introduce the plastic weld rod to the weld zone. Ensure equal levels of hot air are directed at the plastic weld rod and the weld surface to ensure they reach “plasticity” at the same time.
- When the surface plastic shows signs of slight wetting, move the welding nozzle along the groove while at the same time applying downward pressure on the weld rod to ensure a sound bond.