SKU: TRIACSTARTKIT

Leister TRIAC AT Digital Hot Air Plastic Welding Starter Kit

NZ $1,780.58 excl GST

Plastic welding made easy. Also suitable for heat applications. 100% Swiss made quality.

Category Plastic Welding & Heat Tools, Heat Tools, Heat Tools and Plastic Welding, Plastic Welding & Heat Tools, Heat Tools

The TRIAC AT is a new generation tool in the revolutionary TRAIC hot air tool range from Leister. The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It allows you to control your temperature and airflow separately. These two parameters are critical for many plastic welding applications. Temperature settings and airflow settings are easily viewed and adjusted using the new e-drive digital display. The Triac AT incorporates a temperature probe that guarantees a precise temperature. Dual air filters are easily removed for cleaning. The Triac AT features a protective heater tube for user safety.

It is designed for the needs of even the most demanding professional. The TRIAC AT incorporates an ergonomic design, secure handling and a modern look. Decades of experience and Swiss thoroughness is packed into the modern design. Every tool undergoes stringent quality checks prior to leaving the factory in Switzerland. The new TRIAC AT once again proves the renowned reliability of all Leister tools.

100% Swiss made quality.
Weighing less than 1Kg the TRIAC AT is a real lightweight.

Applications:

Roofing
Tarpaulins
Plastic fabrication
Flooring
Shrinking
Overlap welding
Draw welding

Complete kit includes:

TRIAC AT Hot Air Plastic Welding Hand Tool
5mm Speed Weld Push-fit Nozzle
Tacking Nozzle
Tubular Push Fit Nozzle 32mm
Sturdy Tool Box

Voltage	230V
Power Consumption	1600 W
Temperature	40 - 620°C
Air Flow	(20°C max) l/min 120-240
Weight Kg	<1 without cord
Digital Display	√
Adjustable Air Volume	√

Product Brochure (1MB)

Manual (2MB)

How To Weld Rigid Plastics:

Which materials can be welded?
Only Thermoplastics can be welded. You must weld like for like plastic to achieve a structurally sound bond.

Prepare the weld surface. Ensure it is clean of dust and dirt so that you can achieve an unobstructed plastic-to-plastic bond. Notch out a “V” groove along the crack or join.
“Tacking” the join or crack together helps to secure the material in place to ensure there is stability and no misalignment of the joins. Run the tip of a tacking nozzle or heated metal item along the join to create an initial bond.
Using a speed welding nozzle or by free hand pendulum welding technique, introduce the plastic weld rod to the weld zone. Ensure equal levels of hot air are directed at the plastic weld rod and the weld surface to ensure they reach “plasticity” at the same time.
When the surface plastic shows signs of slight wetting, move the welding nozzle along the groove while at the same time applying downward pressure on the weld rod to ensure a sound bond.