View Favourites
Home Polishing Marine Compounds

FAPRE306

Farecla Profile 100 Extra Heavy Cut Paste Compound 3kg

NZ $104.05 excl GST
Sorry, the selected product is currently out of stock. Sorry, there are only 18 of this item currently in stock. the selected product is not available.

Stage 1: Cut. Our “liquid sand paper”, a coarse, water-based cutting compound for aggressive compounding on tough resins and gel coats. It removes P600 dry sanding marks.

Marine Compounds, Profile Marine Maintenance, FARECLA, Marine Compounds , Profile Marine Maintenance , Default - No Category

PROFILE 100 EXTRA HEAVY CUT PASTE COMPOUND

 
  • Aggressive compounding paste for tough resins and gelcoats
  • Leaves a low gloss finish
  • Ideal for plugs and moulds
  • 100ml sample tube now available

Our “liquid sandpaper”, Profile 100 Extra is a coarse, water-based cutting compound designed for aggressive compounding on tough resins and gel coats. It removes P600 dry sanding marks from most substrates, leaving a relatively low gloss finish.

Profile 100 Extra is often used in the first stage of a two-step polishing process when high gloss is required.

 

DIRECTIONS FOR USE

If needed, before polishing, sand up to:
P600 or finer (Polyester resin or gelcoat)
P600 or finer (Vinylester resin or gelcoat)
P800 or finer (Epoxy resin or gelcoat)

  1. Ensure surface is clean, dry and cool to the touch
  2. Mix product well before use
  3. Apply a small amount of product to the applicator
  4. Spread over the surface and polish (speed depends on applicator used)
  5. Work in small areas at a time, keeping the applicator flat to the surface
  6. Wipe clean and repeat if necessary

Questions?

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You might also be interested in ...