Home Equipment Welding Welding Machines

CACTR9

Car-O-Liner CTR9 Fully Automatic Inverter Spot Welder

Enquire Now

Welding, Heating and Joining, Welding Machines

Designed to Perform OEM Welding Procedures Safely

The CTR9 fully automatic welder comes with a new, revolutionized light-weight transformer gun. With its 355° swivel handle and ergo-grip, it enables perfect working positions for anyone, for any job. The gun is supported by a telescopic arm in a durable and lightweight extruded aluminum that can be easily adjusted both vertically and horizontally. A compact power unit with a low center of gravity gives mobility and stability, a 16,000-amp transformer and wifi and bluetooth enabled communication ensure a perfect weld every time.

The CTR9 has a water cooled high pressure C-Yoke. The Inverter Spot Welder is designed for quality-minded body shops  to provide quality spot welds with all new high strength steels using cutting edge inverter technology. It features a wide range of accessories, the state of the art C-Tong handle and a sophisticated software with four welding modes that go from manual to fully automatic. Keep the fully automatic mode on to ensure perfect welding results.


Features and Benefits:
  • Automatically establishes required settings to ensure the proper weld nugget
  • Ready to perform per OEM requirements the CTR® 9 replicates the welding procedure as performed
    by the car manufacturers.
  • Advanced quality control system that monitors and adjusts the welder to guarantee the total energy input
  • With the Weldlogger - you can create work orders and document them in log files that can be printed if needed
  • Lightweight Transformer Gun designed for fast-paced activity
  • Telescopic Aluminium Support Arm ensures maximum freedom of movement (from 1.9 to 2.4m h)
  • Powerful - with welding currents up to maximum of 16,000 Amps
  • Water-cooled with large 20L tank
CTR9 Welding-Modes
Choose between 4 Welding Modes:
  • Fully Automatic: Default mode. All values are automatically set
  • Auto 1: Semi automatic mode. Most of the values are automatically set - except: Total material thickness.
  • Auto 2: Semi automatic mode. Some values are automatically set - except: Number of metal sheets, Type of material and Total material thickness.
  • Manual: Welding time, current and electrode mode are settings that should be set manually.
CTR9 Spot Welder  
Max. voltage 3 x 400V 50Hz
Power supply fuse: 32A slow blow or circuit breaker Type D
Protection type IP21
Insulation class F
Compressed air supply: 5.0-10 bar (72-145 psi)
Welding Output  
Output current 100% 0- 15.8 kA
No load voltage, U2D 13.0 V
Cooling  
Cooling type Liquid cooled
Cooling power: 1000W
Tank capacity: 20 Litre
Flow rate: 3 L/min
Configuration  
Dimensions (HxWxD):
without support arm
1130 x 650 x 930 mm
Cable length 6m
Approx. weight:
(with support arm, 20L water and 80mm yoke)
135 Kg
Mechanical Data  
Electrode force: 350-640 daN

CTR9 Includes the following Yokes:
CTR9 1
C-Tong 40mm throat depth, water cooled
CTR9 2
C-Tong 80mm throat depth, water-cooled
CTR9 3
C-Tong 350mm throat depth,
water-cooled
CTR9 4
C-Tong 500mm throat depth,
water-cooled

If you require further information on the Car-O-Liner Resistance Spot Welder CTR7 or other Car-O-Liner Equipment either email us or call direct on (09) 525 1000 and ask to speak to Paul Wyatt or Gavin Wild.

Questions?

In order to assist us in reducing spam, please type the characters you see:

Thank you for your interest.

Please enter your details and the document will be emailed to you immediately.

You might also be interested in ...