Home Repair Plastic Welding & Repair Plastic and Bumper Repair Consumables

SKU: PVABS3/8W

Polyvance ABS 3/8" x 1/16" Ribbon White

NZ $58.30 excl GST

Category Plastic and Bumper Repair Consumables

ABS is used in many interior plastics as well as motorcycle fairings. It is fairly hard, has a very distinctive smell when melted, smears and gets "hairy" when sanded at high speed. It does NOT have a waxy feel. Easy to weld using either Polyvance's airless plastic welder or when using a hot air plastic welder. This package contains 30 ft. (9.1 m) of WHITE ABS plastic welding rod. Each rod is 1 ft. (30 cm) long and 3/8th inch (9.5 mm) wide by 1/16th inch (1.6 mm) thick. There are approximately 116 rods in one lb. (0.45 kg)

How to Identify:

Symbols	ABS (Acrylonitrile Butadiene Styrene)
Float Test:	Sinks
Burn Test:	Burns slowly with black smoke and soot. Does not drip while burning.
Example Marking(s):