View Favourites

Knowledge Centre

Home / Resources / VONIXX Knowledge Centre / Waterless Wash

Waterless Wash

Originally published by VONIXX on 25 February 2022. Translated and adapted for New Zealand audiences by Wyatt Machine Tools.

Waterless Wash Title Image

Eco-Friendly Vehicle Cleaning with V-ECO

At Wyatt Machine Tools, we’re proud to distribute the VONIXX range throughout New Zealand. One of the standout products in the range is VONIXX V-ECO, an environmentally friendly waterless wash designed to clean vehicles using minimal water.

Developed with biodegradable ingredients, VONIXX V-ECO combines high-performance cleaning agents, environmentally friendly solvents and natural carnauba wax to safely remove dirt while helping reduce the risk of scratching the paintwork.

The formula leaves behind a glossy finish with light protection, thanks to its neutral pH and carnauba wax content.

Whether you’re maintaining a daily driver, preparing a vehicle for display, or looking for a quick maintenance wash between full details, VONIXX V-ECO provides a convenient alternative to a traditional bucket wash.

Where Can V-ECO Be Used?

VONIXX V-ECO is suitable for use on a range of exterior vehicle surfaces, including:

  • Painted surfaces
  • Engine bays
  • Glass
  • Headlights
  • Exterior plastics
  • Tyres

Note: VONIXX V-ECO is designed for exterior use only and is not recommended for interior plastics, fabrics, headliners or leather.

Before You Start

For the best results:

  • Work in the shade and on cool surfaces.
  • Do not apply the product in direct sunlight or onto hot surfaces.
  • Always use clean, high-quality microfibre cloths.
  • If any marks or streaks remain after cleaning, simply repeat the process.

Using V-ECO FAST

V-ECO FAST is a ready-to-use formula ideal for enthusiasts and regular maintenance washes.

Directions

1. Spray V-ECO FAST onto an area no larger than 60 × 60cm.
2. Using a clean PCG Microfibre Cloths, wipe the surface with straight, overlapping side-to-side motions to safely remove dirt.
3. Reapply a smaller amount of product to the same area.
4. Complete the final finish using a clean, dry PCG Microfibre Cloths until the desired gloss is achieved.

Dilution: Ready to use.

Using V-ECO PRO

V-ECO PRO is a concentrated formula designed for professional detailers and workshops.

Directions

1. Dilute the product according to the level of contamination using the dilution guide below.
2. Add the diluted product to a Quant Spray Bottle and shake well before use.
3. Spray onto an area no larger than 60 × 60cm.
4. Remove dirt using a clean PCG Microfibre Cloths, wiping with straight side-to-side motions and regularly folding the cloth to expose a clean section.
5. Reapply a smaller amount of product to the same area.
6. Complete the final finish using a second clean, dry PCG Microfibre Cloths until the desired gloss is achieved.
7. Repeat the process if required.

Recommended Dilutions

Cleaning Level

Dilution

Suitable For
Heavy Cleaning 1:15 Mud, heavy dirt and heavily soiled vehicles
General Cleaning 1:30 Road grime, dust and light mud
Maintenance Wash 1:50 Light dust and regular upkeep
 

Tips for the Best Results

  • Fold your PCG Microfibre Cloths regularly to ensure you are always working with a clean surface.
  • Replace heavily soiled cloths rather than continuing to use them.
  • Work on one section at a time to prevent the product from drying before removal.
  • Use a second dry microfibre cloth for the final buff to maximise gloss.

Related Products

Original Source

This article has been translated and adapted from the original VONIXX article:

“Passo a Passo Para Uma Lavagem Ecológica a Seco”

Originally published by VONIXX on 25 February 2022.