Yellow (Medium). 80/90mm. Per unit.
The new wool pad range is compatible with the random orbital
and the gear driven polishers
included in the BigFoot family.
The face of the wool pads is constructed of 100% natural fibres attached to a polyester backing material layer. Quality control for the wool is monitored through the entire manufacturing process to ensure consistency.
The Yellow Medium Wool Pad
features a consistent 15mm fibre length through the entirety of the pads surface. This soft and flexible wool, paired with the softer yellow foam backing offers more flexibilty to allow for improved control on curves and contours, provides excellent cutting of moderate defects, and excellent finishing ability on most surfaces. For automotive topcoats, sticky paints, fresh paint or gelcoat.
The blue foam of the coarse wool pad is more rigid and dense which maximizes the translation of tool movement to the work surface, providing increased cutting power.
The Blue Coarse Wool Pad
features two fibre lengths to create a dual density wool surface and a distinctive pattern. This configuration provides a great balance of cutting and finishing power compared to single density wool pads. The blue foam of the coarse wool pad is more rigid and dense which maximizes the translation of tool movement to the work surface, providing increased cutting power.
Coarse, medium, or fine abrasive compounds (Zephir, Quarz, or Keramik) are recommended when medium wool pads will be used with a free spinning random orbital such as the LHR15 or LHR21 tools. The selection of compound will depend on the work surface and severity of defects. The new wool pads also work well on dual-action forced rotation (Gear Driven) polishers. Mille Coarse abrasive compound is recommended when medium wool pads will be used with the BigFoot Mille gear driven polisher.