Like 90 Quick Check � Temporary Gloss Simulator

A faster, more convenient way to match color for a repair.
Like90 QuickCheck™ simulates the depth and clarity of fresh clear on base, eliminating the need to spray expensive clear coat on spray-out cards*. Unlike clear coat, Quick Check:

Can be sprayed anywhere that is convenient or wherever the lighting is best for matching color.
Dissipates completely so that another color coat can be applied to the same spray-out card if the first try does not match.
Requires no clean-up and contains no isocyanates.

Unlike wax and grease remover, Quick Check:

Doesn’t smell
Sprays on the surface more evenly, better simulating the glossy finish of a clear coat.
Stays wet long enough to allow plenty of time to judge a color match, even in hot, dry weather.
Won’t distort metallic lays.
Dissipates completely without leaving any residue behind.

A fast, easy way to check repaired panels for defects.
Quick Check also reveals “wavy” body-work. Quick Check

Can be used either in the body shop or the paint shop.
Stays wet long enough so that the straightness of repaired panels can be evaluated.
Dissipates completely without leaving any residue behind
Is safe to spray over cured plastic filler.

283g Aerosol.

Directions for Use:
Color matching: Spray on base coat color paddle (spray-out card) to create a temporary glossy surface. Repeat this process until an optimum color match has been achieved. (To accelerate evaporation, use compressed air, hand-held dryer, or other air movement.) *NOTE: The UV blockers in a clear coat may slightly affect the cast of certain colors compared to what you see with Quick Check. Use the appropriate clear coat to confirm your final match.
Panel checking: To check straightness of repaired panel, spray on bare panel. Examine panel for defects.

Coverage: Approximately 150 spray-out cards or 15 to 20 panels (about 6 square feet each) per can.

Video Tutorial: