Farécla Launches New G3 Premium Abrasive Compound

Faréclas NEW G3 Premium Abrasive Compound is going down well with New Zealand Bodyshops

innovation Farecla-G3-Premium
Faréclas new G3 Premium Abrasive Compound is going down well with New Zealand Bodyshops, Wyatt Machine Tools, New Zealand’s only authorised Farécla distributor, can reveal.

Over 50 years’ experience in the surface refinishing industry has allowed Farécla a unique understanding of today’s bodyshop challenges.

“We always listen to what our customers tell us. With new paint technology constantly improving, so do our compounds. We are excited to offer bodyshops a new compound to the range that will meet their needs and surpass their expectations.”.

G3 Premium Abrasive Compound, which does not replace the Farécla products you have come to know and trust, is a complete cutting compound & finishing polish in one. It is the only compound needed to permanently remove P1500 of finer sanding marks from all modern paint systems, while leaving a swirl free, high gloss finish with reduced product consumption.

G3 Premium has a transparent film which allows the operator to see the work area when compounding. No delays in checking that the job is complete. G3 Premium performance relies on its advanced and complex emulsion system, which allows the abrasive particles to work faster, and does not diminish over a short time.

Features:
  • Long Lasting, powerful Cut.
  • Permanent Results, Fast.
  • No dragging, staining or hazing on fresh paints.
  • No dusting or splatter. Exceptionally easy and quick to wipe off.
  • A rare compound that can be used on ALL modern paint systems, including the very latest ‘hyper’ clear coats.
 

The level of finish is so high with G3 Premium that in the majority of cases it’s a one-step technology when used with the G Mop Yellow Compounding Foam.
innovation Farecla-Yellow-Compounding-Pads2
FAGMC312 (3” foam)
FAGMC612 (6” foam)
FAGMC812 (8” foam)


However, if needed, the G Mop Finishing Foam is the ace up your sleeve to follow with (arriving soon). This will remove swirls or holograms that might remain, and leave the enhanced gloss finish you can expect from Farécla products.
innovation Farecla-G-Mop-Finishing-Foams
FAGMF301 (3” foam)
FAGMF601 (6” foam)
FAGMF801 (8” foam)

As with all the Farécla products in the range, they contain no fillers, no silicone and are water based, so there is no issue with die back, which means no rework. Results are permanent and fast.

Don’t take our word for it, give us a call to arrange a free demonstration and have one of our trained staff come and show you how you can benefit from the advantages of this fantastic, new product.